Welcome to Xinhai Mineral Processing Plant!
Gravity Separation Equipment

Gravity Separation Equipment

Introduction
An equipment realizes the separation of light and heavy mineral by the different sedimentation speed in vertical alternating water flow
Capacity
1~25t/h
Product Improvement
The cone slide valve is adopted; the failure rate is reduced by 80%; low energy consumption;the separation of different material, improvement of the processing capacity by more than 35%.

Email :[email protected]

Description

MineralGravity Separation Equipment gravity tin ore separation equipment is a mineral separation device for fine minerals working by gravity.It is effective in processing precious and base metal,rare metal and non-metallic minerals,widely used in separation of Gold,Lead,Zinc,Mercury,Cooper,Aluminum,etc.

Spiral chute is a new type of gravity concentration equipment for separating 0.6-0.05mm (can separate > 2mm material under special circumstances) fine particle ore, including iron, ilmenite, chromite, pyrite, tungsten, tin, tantalum-niobium, alluvial gold, zircon, rutile, monazite, phosphorus and other non-ferrous metals, rare metals, non-metallic minerals with specific gravity difference.

Related Products

  • Gold Shaker Table
    Gold Shaker Table

    Introduction
    Gold Shaker Table is a gravity separation equipment of separation different weight mineral by asymmetric reciprocating motion
    Capacity
    0.1~1.8 t/h
    Product Improvement
    The cam lever type head is adopted; the stroke is adjusted by changing the position of sliding head on rocker arm; jig frequency is controlled by the smoothing motor pulley.

  • Spiral Chute
    Spiral Chute

    Introduction
    A gravity separation equipment of separation different weight mineral by inertial centrifugal force pulp produced in helix turning motion
    Capacity
    0.15бл16t/h
    Product Improvement
    There are 3 kinds of chute for user to choose, glass steel chute, Xinhai wear-resistant rubber liner, polyurethane rubber liner.

  • Jigging in Mineral Processing
    Jigging in Mineral Processing

    Introduction
    Jigging in Mineral Processing is an equipment realizes the separation of light and heavy mineral by the different sedimentation speed in vertical alternating water flow
    Capacity
    1бл25t/h
    Product Improvement
    The cone slide valve is adopted; the failure rate is reduced by 80%; low energy consumption;the separation of different material, improvement of the processing capacity by more than 35%.

Guestbook

write down your requirement and contact details in the following form to get the latest price of this product within one day!

Email: [email protected]

Factory Address:No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China

Zip Code:100022

Contact Us